一. 设置当前交换机为server模式
switch>enable
switch# configure t
switch(config)>vtp mode server
switch(config)>exit
二. 删除原先的vlan
switch>enable
switch# configure t
switch(config)>no vlan VLAN-ID
switch(config)>exit
三. 增加一个新的vlan
switch>enable
switch# configure t
switch(config)>vlan VLAN-ID
switch(config)>name VLAN-NAME
switch(config)>exit
比如
Switch# configure terminal Switch(config)# vlan 20 Switch(config-vlan)# name test20 Switch(config-vlan)# end
四. 分配一个到指定的vlan
Switch# configure terminal Enter configuration commands, one per line. End with CNTL/Z. Switch(config)# interface gigabitethernet0/1 Switch(config-if)# switchport mode access Switch(config-if)# switchport access vlan 2 Switch(config-if)# end
五. 重载配置
copy running-config startup-config
六. 备忘录
vlan的id 比如10 20 30,这些你在网关上要对应,我这是使用的routeros。这样才能起到一个局域网内有不同的网段以及网段之间的阻隔。
0 Comments.